Home
Best Sellers
Speed Balaclava "Offenbach"

Reference: shspeed

Speed Balaclava "Offenbach"

(0)
Balaclava is of heavy quality, absorbs moisture well and has a good fit. 95% cotton 5% elastane
Price €1.49
More
All best sellers
Active filters
Honda GX270 UT2 RHG4

Reference: GX270RHQ5

Honda GX270 UT2 RHQ5

(0)
Equipment GX270: - Oil bath coupling with 1: 2 reduction, shaft Ø 22 mm- wedge 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- Fuel tank 5.3 liters, white- Exhaust standard- CDI ignition with variable ignition timing - WITHOUT shutdown- throttle and choke lever (engine operation)- Connection for...
Price €1,196.00
More
Honda GX270 UT2 RHG4

Reference: GX270SHQ5

Honda GX270 UT2 SHQ5

(0)
Equipment type SHQ5: - shaft Ø 25 mm (S type)- wedge 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- CDI ignition with adjustment curve (WITHOUT switch-off)- Air filter dual (double, fig. 3, photo filter selection)- Fuel tank- Exhaust standard- throttle and choke lever (engine operation)- Connection for external...
Price €809.00
More
Honda GX390 UT2 SHQ5

Reference: GX390SHQ5

Honda GX390 UT2 SHQ5

(0)
Equipment type SHQ5: - shaft Ø 25,0 mm (S-type)- wedge 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- CDI ignition with variable ignition timing and WITHOUT shutdown- Fuel tank 6.10 liters, white- Exhaust standard- throttle and choke lever (engine operation)- Connection for external wire pull-...
Price €995.00
More
Housing, Starter GX 160/200

Reference: 28410-ZE2-W01ZN

Housing, Starter GX 270

(0)
Red metal case (without inner workings) for recoil starter.
Price €158.00
More
Ignition Coil GX 270/390

Reference: 30500-ZF6-W03

Ignition Coil GX 270/390

(0)
Original ignition coil GX270 to 390 K1, U1, UT1. NOT suitable for the current UT2 motors!
Price €195.95
More
Inlet valve guide GX 160/200

Reference: 12204-ZE1-306

Inlet valve guide GX 160/200

(0)
Valve guide for intake valve Honda GX 140/160/200. NOTE: These are "undersize" valve guides. The valve guides must be gripped after fitting to the dimension of the valve!In addition, the valve seat must always be reworked when valve guides have been replaced.
Price €9.18
More
Honda GX 270 - 390 Inlet valve guide

Reference: 12204-ZE2-306

Inlet valve guide GX 270 - 390

(0)
Valve guide for inlet valve GX270 to 390. NOTE: These are "undersize" valve guides. The valve guides must be reamed after insertion to the dimension of the valve!In addition, the valve seat must always be reworked when valve guides have been replaced.
Price €13.50
More
Back to top

Follow us on Facebook

Facebook