Honda Engines

Equipment type SHQ4 - shaft Ø 20 mm (S type)- wedge 5 x 5 x 33 mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Fuel tank- Exhaust standard- Gas and choke lever (operation on the engine) + connection for external throttle cable- without clutch

Type QHQ4 - shaft 19.05 mm (Q type)- wedge 4.8 X 4.8 X 38mm (wedge is NOT included)- female thread 5 / 16-24 UNF- recoil starter (pull starter)- Air filter dual- Fuel tank- Exhaust standard- throttle and choke lever (operation on engine) + connection for external throttle linkage

Equipment type SHQ4 - shaft 20 mm (S type)- wedge 5 X 5 X 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Fuel tank- Exhaust standard- throttle and choke lever (engine operation)+ Connection for external throttle cable- without clutch

Equipment type RHG4 - shaft 20.0 mm (S type), shaft coupling 22mm- 7 X 7 X 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual (double, fig. 3, photo filter selection)- Exhaust standard- throttle and choke lever (engine operation)+ Connection for external throttle cable - with oil bath coupling, shaft 22mm,...

Type RHG4: - shaft 25.0 mm (S type), shaft coupling 22mm- 7 x 7 x 33mm (wedge attached)- Internal thread M8 X 1,25- recoil starter (pull starter)- Air filter dual- throttle and choke lever (operation on the engine) + connection for external wire pull- with oil bath coupling, shaft 22mm, wedge 7 x 7 x 33mm- CDI ignition with adjustment curve and without...